Tag Archives: Software Architecture

How Are PLCs Changing With Software Defined Automation

How Are PLCs Changing With Software Defined Automation

Programmable logic controllers have traditionally been associated with dedicated hardware, established control programs, and repeatable machine behavior. They remain an important part of industrial automation, particularly where production depends on stable operation, consistent timing, and dependable equipment responses. As manufacturing requirements change, however, control systems are being asked to do more. Flexible configurations, manageable software updates, and closer links between machines and digital platforms are now part of the discussion.

Software-defined automation is changing how PLC systems are built, configured, and supported. Rather than keeping every automation function within a controller's hardware and software environment, newer architectures allow some responsibilities to move into modular software applications. These applications can run on compatible industrial computing platforms and communicate through defined interfaces. This gives engineers more room to adapt control logic and distribute automation tasks across suitable computing resources.

Traditional PLC hardware still has a place in this arrangement. Physical controllers continue to provide reliable machine-level control in many installations. The shift concerns how responsibilities are divided, how applications are managed, and how control equipment exchanges information with production software and operational systems.

Why Are Traditional PLC Architectures Facing New Demands?

Traditional PLC systems follow a familiar pattern. The controller reads signals from sensors, executes programmed instructions, and sends outputs to motors, valves, actuators, and other devices. Hardware and software are designed to work closely together, giving machines a predictable way to carry out repeated operations.

This arrangement suits processes that remain consistent over time. A packaging machine, conveyor line, or assembly station may follow the same operating sequence for years. After commissioning, program changes usually relate to maintenance, equipment modifications, or adjustments to the production process.

Production requirements are not always so steady. Shorter product runs, customized orders, additional inspection tasks, and connections to digital production platforms can all increase the need for control-system changes.

Several practical challenges become clearer under these conditions:

  • Limited hardware flexibility: Additional functions may require a larger controller, extra modules, or separate hardware.
  • Software dependency: Programs are often developed around a particular controller platform, which can complicate migration or equipment changes.
  • Integration difficulties: Older systems may need gateways or custom interfaces to exchange information with newer devices.
  • Maintenance complexity: Updating several machines can involve different engineering tools, procedures, and compatibility checks.

Software-defined automation addresses some of these constraints by separating selected automation functions from dedicated controller hardware. That separation can make software easier to manage while preserving dependable control where the machine requires it.

What Does Software Defined Automation Mean for PLC Systems?

Software-defined automation changes the relationship between control applications and the hardware that executes them. In a conventional PLC system, the controller supplies the processing environment for its program. Its computing resources, communication interfaces, and engineering tools are usually part of a closely linked platform.

A software-oriented architecture allows certain automation functions to run as applications on industrial computing equipment. Depending on the runtime and platform, those applications may be installed, updated, or moved between compatible environments. Not every function has to remain attached to a particular physical controller.

The approach brings several changes:

  • Control functions can be organized into separate modules.
  • Hardware and software can be managed with a greater degree of independence.
  • Automation components can communicate through more open interfaces.
  • Computing resources can host different industrial applications.
  • Some software updates can be made without changing the underlying hardware.

This can be useful when a production line needs new capabilities but does not justify a complete control-system replacement.

There are limits to that flexibility. Tasks involving tight response times, coordinated motion, or safety-related behavior need an execution environment designed for those requirements. Running control software on an industrial computer does not, by itself, guarantee deterministic performance. The operating system, runtime, network, and hardware configuration all contribute to the result.

How Is Control Logic Becoming More Flexible?

Control logic defines how equipment responds to signals, commands, and operating conditions. In a conventional installation, that logic is commonly stored and executed in a particular PLC. Engineers use the relevant programming tools to connect to the controller, make changes, and deploy a tested version.

Software-defined approaches encourage a more modular organization of automation functions. A machine program can be divided into components with specific responsibilities and documented interfaces, rather than managed as a tightly connected block of logic.

For example, a conveyor system may have separate functions for:

  • Motor starting and stopping
  • Product detection and position tracking
  • Speed adjustment
  • Fault monitoring
  • Communication with a production management system

With suitable interfaces, a change to product tracking can be handled without rewriting the motor-control sequence. Engineers still need to check how the revised function exchanges signals with the rest of the system.

Modularity can also help when equipment is expanded. An additional conveyor section or inspection station may be introduced through a new software component, reducing the amount of existing logic that needs modification.

This is not exclusive to software-defined systems; conventional PLC programming also supports modular design. The difference is that software-oriented architectures can extend that separation to deployment and computing resources. Testing remains necessary because a localized change can still affect timing, shared data, or coordination between machines.

Why Are Open Architectures Becoming Important?

Open architecture supports the broader aims of software-defined automation. Conventional control environments often depend on a supplier's hardware, programming software, and communication methods. These dependencies can become awkward when a facility combines equipment from several vendors or introduces a new production platform.

An open architecture relies more heavily on documented interfaces and shared communication standards. Controllers, industrial computers, sensors, and production applications can exchange information without requiring every component to belong to the same product family.

Architecture FeatureTraditional PLC ArrangementSoftware-Oriented Arrangement
Control structureHardware and control program are closely linkedFunctions can be divided into modular applications
Application deploymentUsually associated with a specific controller platformMay extend across compatible computing environments
System integrationCan depend on dedicated interfaces or gatewaysGreater emphasis on documented, open interfaces
Software updatesManaged through controller-specific engineering proceduresCan support broader application-management tools
Equipment expansionMay require controller or hardware changesSome capabilities can be added through software
System managementCommonly organized around individual controllersMay include centralized application management

These differences describe a direction of development, not a strict division between two types of equipment.

Open communication does not make devices automatically interchangeable. Data formats, supported services, timing requirements, and device behavior can still differ. Engineers need to configure interfaces and verify that connected systems interpret information consistently.

For facilities operating equipment from different generations, this approach can support gradual modernization without requiring every machine to be replaced together.

Can Industrial Computers Take Over Some PLC Functions?

Industrial computers have a growing role in software-based automation. They can offer computing capacity for control applications alongside data processing, visualization, equipment monitoring, and communication services.

With an appropriate control runtime and system configuration, an industrial computer can perform tasks previously handled by a dedicated PLC. A single platform may host several applications, although their interaction and resource requirements need careful planning.

The decision involves more than replacing one device with another. PLCs and industrial computers have different maintenance requirements and operating characteristics.

ConsiderationTraditional PLCIndustrial Computer
Main roleMachine sequencing and process controlControl, computing, and data-related applications
Operating environmentPurpose-built control platformIndustrial computing platform with a configured operating environment
Software flexibilityOften associated with a particular controller ecosystemCan host a range of compatible applications
Maintenance focusController hardware, firmware, and control programHardware, operating system, runtime, and applications
Common useEquipment sequencing and input/output controlData processing, integration, visualization, and software-based control

The suitable choice depends on the application rather than the device label.

An industrial computer used for control must meet the required response times, availability targets, and environmental conditions. Its software configuration also needs to remain stable throughout operation and maintenance.

A combined arrangement is often practical. The PLC can retain equipment sequencing and time-sensitive responses, while an industrial computer handles production information, operator displays, or communication with other systems. Software-defined automation adds options for allocating those responsibilities.

How Does Software Defined Automation Affect Machine Integration?

Integration becomes more demanding as production lines bring together different machines, control platforms, and monitoring tools. Each machine may have its own operating sequence, yet still need to exchange status information and coordinate with adjacent equipment.

Conventional integration often involves dedicated connections and machine-specific programming. Adding or replacing equipment can require changes to existing interfaces, particularly where signal definitions or communication methods differ.

Software-defined automation can separate some integration functions from the underlying machine-control logic. Communication services and coordination applications can then be managed as distinct parts of the system.

Consider a packaging line with a filling station, a labeling machine, and a carton-handling section. Each unit controls its own equipment, while the line must coordinate product flow and react to interruptions.

A software-oriented arrangement may provide separate applications for:

  • Machine-level operation
  • Production status collection
  • Equipment coordination
  • Alarm and fault information
  • Communication with production management software

This separation gives each component a clearer responsibility. A reporting application, for instance, may be updated without modifying the machine sequence, as long as its interface remains compatible.

The interface is still part of the engineering work. Teams need agreed signal definitions, consistent data handling, and suitable response times. They also need to establish what equipment will do if communication is delayed or lost. Modularity helps organize integration, but it does not remove these requirements.

What Changes in PLC Maintenance and Software Updates?

Traditional PLC maintenance centers on controller condition, program backups, input and output checks, and troubleshooting through engineering software. Those tasks remain relevant, even when additional automation functions move into software applications.

The maintenance scope becomes broader in a software-oriented system. Teams also need to track application versions, runtime dependencies, operating environments, network settings, and the relationships between connected services.

Centralized management can make some updates easier to distribute. A monitoring application used across several stations, for example, may be deployed through a common process instead of configured separately at each machine. Deployment still needs to account for differences between stations and their production schedules.

Software management introduces several responsibilities:

  • Version control: Maintain a record of the applications and configurations installed on each system.
  • Backup management: Protect control programs, application files, and the settings needed to restore operation.
  • Compatibility checks: Confirm that an update works with the existing runtime, hardware, and connected applications.
  • Recovery planning: Define how the previous working version will be restored if deployment fails.
  • Access management: Restrict software changes and configuration privileges to authorized personnel.

Maintenance staff may therefore need software-management skills alongside their knowledge of electrical systems, machine behavior, and control programming.

Clear procedures matter as much as the management tools. An update that is easy to distribute still needs review, testing, and an appropriate deployment window.

Does Software Defined Automation Change Industrial Safety Requirements?

Safety requirements remain tied to the machine and its hazards, regardless of where the control software runs. Emergency stopping, protective interlocks, isolation measures, and safe operating states must continue to perform their intended functions.

A more connected computing environment adds issues that need attention during system design. Remote access, application updates, shared computing resources, and network communication can introduce dependencies that affect operation.

Safety-related functions need suitable architectures, verified behavior, and the relevant safety lifecycle controls. General-purpose applications cannot be assumed to replace a safety controller or another validated safety function. Software-based safety solutions are possible, but their suitability depends on the complete system and its assessment.

Cybersecurity is a related, but distinct, concern. Unauthorized access, altered settings, or compromised software can disrupt production and may create conditions that affect equipment operation.

Practical protection measures include:

  • Separating control networks from office networks where the system design requires it.
  • Restricting access to engineering tools and configuration functions.
  • Recording software versions and configuration changes.
  • Testing updates before deploying them to operating equipment.
  • Preparing recovery procedures for software or communication failures.

The aim is to gain flexibility without weakening the safeguards that keep equipment operating within defined limits. Safety and security need to be considered during architecture design, not added after deployment.

Where Could Software Defined PLCs Be Used in Future Automation Projects?

Software-defined PLC architectures can be useful where equipment arrangements change regularly or where control, monitoring, and production applications need closer coordination.

Their value depends on the work the system must perform. Several industrial settings illustrate where the approach may fit.

Flexible assembly lines

Assembly lines may handle different product variants, station arrangements, and process sequences. Modular applications can make individual station changes easier to manage, particularly when interfaces remain consistent across the line.

Warehouse and material handling systems

Conveyors, sorters, lifting equipment, and automated storage systems need coordinated behavior. Software-based applications can support communication, operational monitoring, and selected control functions, while suitable local control handles equipment responses.

Packaging and processing equipment

Changes in product format can affect handling, inspection, filling, and packaging sequences. Separating software responsibilities can simplify some adjustments and help engineers limit changes to the affected functions.

Multi-machine production environments

Facilities with equipment from different suppliers and generations may benefit from shared interfaces and more consistent application-management practices. Existing controllers can remain in place while additional software improves data exchange and coordination.

The business case depends on integration effort, maintenance capability, equipment requirements, and expected service life. A machine that performs a stable task with few program changes may remain well served by a conventional PLC. A frequently reconfigured production system may gain more from a software-oriented architecture.

What Should Be Considered Before Moving Toward Software Defined Automation?

Moving toward software-defined automation involves more than selecting an industrial computer or installing a control runtime. Existing programs, field devices, networks, engineering practices, and support arrangements all influence whether the proposed system will work reliably.

A gradual transition can reduce disruption and give teams time to evaluate the architecture under realistic operating conditions.

Several considerations deserve attention during planning:

  1. Review existing control functions: Identify tasks with strict real-time requirements and distinguish them from monitoring, reporting, or other functions that can run separately.
  2. Check hardware compatibility: Confirm that controllers, industrial computers, sensors, input/output devices, and connected equipment support the proposed arrangement.
  3. Evaluate communication requirements: Define how commands, status signals, and production data will move between components, including behavior during interruptions.
  4. Plan software management: Establish procedures for installation, version tracking, testing, backups, updates, and recovery.
  5. Prepare maintenance personnel: Give technical teams the knowledge and tools needed to support both conventional control equipment and the additional software environment.

A complete replacement may not be necessary. Facilities can begin with monitoring, data collection, or communication applications while retaining existing PLCs for machine control.

This allows production and maintenance teams to assess performance, support requirements, and operational changes before extending the approach to other equipment.

Software-defined automation is moving PLCs toward a more connected and adaptable role within industrial systems. Dedicated controllers continue to provide dependable machine-level operation, while modular applications, industrial computing, and open interfaces broaden the available design choices. The change is not a simple transfer from hardware to software. It is a different way of combining reliable physical control with software that can evolve as production needs change.